ZJHP regulating valve
ZJHP regulating valve
The ZJHP pneumatic control valve produced by Shanghai Yang Yi Valve Co., Ltd. adopts the top guide structure and is equipped with multi spring actuator. The utility model has the advantages of compact structure, light weight, sensitive action, fluid channel S streamline, small pressure drop loss, large valve capacity, accurate flow characteristics, convenient disassembly and assembly, etc..
It is widely used in the accurate control of gas, liquid and other media process parameters, the pressure, flow, temperature, liquid level to maintain a given value. It is especially suitable for occasions where the leakage is small and the pressure difference between front and rear valves is small.
This series of products have standard type, cut off type, bellows seal type, jacket insulation type and many other varieties. Nominal pressure levels of products are PN16, 40, 64; nominal diameter range DN20~300. Applicable fluid temperature range from -200 to 560 degrees celsius. The leakage standard has level IV or class VI, and the flow characteristics are linear or equal. A variety of varieties and specifications to choose from.
技术参数
调节机构主要技术参数 | ||||||||||||||||
公称通径(mm) | 20 | 25 | 40 | 50 | 65 | 80 | 100 | 150 | 200 | |||||||
阀座直径(mm) | 10 | 12 | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | ||
额定流量 系数KV |
直径 | 1.8 | 2.8 | 4.4 | 6.9 | 11 | 17.6 | 27.5 | 44 | 69 | 110 | 176 | 275 | 440 | 690 | |
等百分比 | 1.6 | 2.5 | 4 | 6.3 | 10 | 16 | 25 | 40 | 63 | 100 | 160 | 250 | 400 | 630 | ||
公称压力MPA | 0.6,1.6;4.0;6.4 | |||||||||||||||
流量特性 | 直线、等百分比 | |||||||||||||||
介质温度℃ | -20~200(常温);-40~450(中温) | |||||||||||||||
法兰尺寸 | 铸铁法兰尺寸按JB78-59,铸钢法兰尺寸按JB79-59 | |||||||||||||||
法兰型式 | 法兰密封面型式按JB77-59,其中铸铁法兰按光滑式,铸钢法兰按凹式 | |||||||||||||||
阀体材质 | PN | 0.6,1.6 | HT200 | |||||||||||||
MAP | 4.0,6.4 | ZG270-500;ZG1CR18Ni9Ti,ZG0CR18Ni12Mo2Ti | ||||||||||||||
上阀盖型式 | 普通式(常温式);热片式(中温式) | |||||||||||||||
可调比 | 50:1 |
执行机构主要技术参数 | |||||||||||
型号 | ZHA(B)-22 | ZHA(B)-23 | ZHA(B)-34 | ZHA(B)-45 | |||||||
有效面积CM2 | 350 | 350 | 560 | 900 | |||||||
行程MM | 16 | 25 | 40 | 60 | |||||||
弹簧范围MPA | 0.02~0.10;0.04~0.20;0.08~~0.24;0.02~0.60;0.06~0.10 |
返回头部↑
主要零部件
主要零件材料及推荐使用温度范围 | ||
零件名称 | 零件材料 | 温度范围 |
阀体 | HT200 | -20~+200 |
ZG270-500 | -40~+400 | |
上阀盖 | ZG1CR18Ni9Ti | -250~+550 |
ZG0Cr18Ni12MO2Ti | -40~+600 | |
阀芯、阀座、波纹管 | 1CR18Ni9 | -250~+550 |
0Cr18Ni12MO2Ti | -250~+550 | |
填料 | 聚四氟乙烯 | -40~+200 |
膜片 | 丁晴橡胶夹增涤沦物 | |
压缩弹簧 | 60Si12Mn | |
膜盖 | A3 |
许用介质压力和工作温度关系 | ||||||||||
阀体材料 | 公称压力 MPA |
介质工作温度℃ | ||||||||
<120 | <200 | <250 | <300 | <350 | <400 | <425 | <435 | <450 | ||
最大工作压力MPA | ||||||||||
HT200 | 0.6 | 0.6 | 0.55 | 0.5 | ||||||
1.6 | 1.6 | 1.5 | 1.4 | |||||||
ZG270-500 | 0.6 | 0.6 | 0.56 | 0.5 | 0.45 | 0.4 | 0.36 | 0.32 | 0.3 | |
ZG1CR18Ni9Ti | 1.6 | 1.6 | 1.4 | 1.25 | 1.1 | 1 | 0.9 | 0.8 | 0.75 | |
ZG0Cr18Ni12MO2Ti | 4 | 4 | 3.6 | 3.2 | 2.8 | 2.5 | 2.2 | 2 | 1.9 | |
6.4 | 6.4 | 5.6 | 5 | 4.5 | 4 | 3.6 | 3.2 | 3 |
返回头部↑
在线提交需求反馈
您可以填写下面的表格,把您的联系方式和产品需求提交给我们,我们将尽快与您联系解决,谢谢!为了能及时和您取得联系,请您务必完整填写您的联系方式和需求信息。
您可能对以下信息感兴趣?
- NB-KR系列
- |
- WSM-400IGBT
- |
- MZ-R系列
- |
- ZX7系列
- |
- BX3-2系列